In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting dogsrecommend.com/dog-mask/ board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Make sure the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are flat and make certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll have to do some sanding to make sure that it is safe on your dog. You can accomplish this by sanding off any excess paper that may have been eliminated from your mask.